Fein ABS18 Q Manual Del Usuario página 21

OBJ_BUCH-0000000311-001.book Page 21 Friday, May 4, 2018 9:20 AM
Illumination (figure 16).
Never look or stare into the
WARNING
light of the power tool's lamp
from a short distance. Never point the light of
the lamp into the eyes of other persons in
close vicinity. The radiation produced by the
lamp can be harmful for the eye.
When pressing the On/Off switch, the light is
switched on.
After releasing the On/Off switch, the light
briefly stays on and then switches off auto-
matically.
Handling the battery.
Operate and charge the battery only within
the battery operating-temperature range of
0°C – 45°C (32°F –113°F). At the beginning
of the charging procedure, the battery tem-
perature must be within the battery operat-
ing-temperature range.
Battery charge-control indicator
(figure 17).
Press the button to activate the LED indica-
tion.
LED indica- Meaning
tor
1 – 4 green Percentage
LED of charge
condition
Continu- Battery is
ous red almost
light empty
Red flash- Battery is
ing light not ready
for opera-
tion
The real percentage of the battery charge
condition is only indicated when the power
tool motor is stopped.
The electronics automatically switch off the
motor prior to the battery being deep dis-
charged.
Activity
Operation
Charge battery
Bring the battery
into the battery
operating-tempera-
ture range, then
charge
Fig. 16
10 sec.
Fig. 17
en
21
=
=
≤ 100 %
≤ 75 %
≤ 50 %
≤ 25 %
= 0 %