Installation Position - RK Rose+Krieger SLZ 63 Manual De Servicio

7. Life phases
•
When installing the swivel flange and the trunnion support block, please use the
supplied screws.
•
If the screws are too long, they may damage the cover plate or the gear cover
during installation.
•
To install the swivel head and the clevis, please use the supplied nuts to be able
to counter the heads properly.

Installation position

F
1
Draw bar
load
DH
There must be no shear forces on the push rod!
70
F
=
2
Draw bar
load
Maximum torque on the push
<
rod 5 Nm