Pentair NOCCHI MULTI EVO Manual De Instrucciones página 16

ENGLISH
APPLICATION
The Multi EVO pump is a horizontal
non­priming or self­priming multi­stage
pump for pumping clean liquids with­
out solid suspended particles, fibers, or
abrasive materials that may chemically or
mechanically attack the pump, or liquids
not compatible with the pump construc­
tion material.
The pump can be used to pump water in:
• water distribution systems
• irrigation systems
• rain water collection systems
Never use the pump for flamma­
ble and/or explosive liquids.
Improper use of the pump can
lead to physical injury and/or
material damage. Improper use
of the product will render the warranty
null and void.
Note
The pump is designed for use with drink­
ing water destined for human use (Italian
Min. Decree 174 and ACS).
Application Limits
• Temperature of pumped liquid: from
+5°C to +50°C in compatibility with the
pump materials.
• Maximum ambient temperature:
+40°C;
• Max. operating pressure: 8bar
(0.8MPa);
the data plate (Figure 5) lists the specifi­
cations:
Pos. Description
1 Type of pump
2 Flow rate range
16 16
3 Head range
4 Minimum head
5 Number of phases
6 Voltage
7 Frequency
8 Motor rpm
9 Insulation class
Absorbed power of electric
10
pump
11 Rated current
12 Condenser capacity
13 Protection rating
14 Maximum liquid temperature
15 Maximum ambient temperature
16 Maximum operating pressure
17 Weight
18 Serial number
19 Date of manufacture
Sound pressure level
The sound pressure level is below 70dB
(LpA) on the following models:
The sound pressure level is above 70dB
(LpA) on the following models:
...
maximum head
See appendix.
Transport and storage
On delivery, check that the electric pump
has not been subject to damage during
transport; in this case notify the retailer
immediately.
Check procedure phases: