Main Components; Technical Specifications; Riveting Tool Identification; Electrical Connection - FAR EB 311 Instrucciones De Uso

EB 311

MAIN COMPONENTS

A) ................................................................................ Nozzle
B) .........................................................................Nozzlehead
C) ................................................................................ Button
D) ............................................................................... Battery
2 3 5
4 5 m
B
A
8 2 m
m
D

RIVETING TOOL IDENTIFICATION

The EB 311 is identified from a marking that shows company
name and address of manufacturer, designation of the tool, CE.
Always refer to the information on the riveting tool when
requesting technical service.
WARNING!
The work area must always be kept neat
and well-lit.
In particular, flammable liquids or gases must
not be present.
Revisione - 03
m m
m
GB
Serial number
Company name
C
and address
Name of manufacturer

TECHNICAL SPECIFICATIONS

• Supply voltage ............................................................. 12 V
• Weight .................................................................. 2,550 Kg
• Operating temperature ...........................................-5°/+50°
• Root weighted mean square of overall
acceleration frequency (Ac)
to which arms are subjected ............................... < 2.5 m/s
• A-weighted emission sound pressure level ............ 80 dBA
• Peak C-weighted instantaneous sound pressure <130 dBC
• A-weighted sound power ........................................ 86 dBA

ELECTRICAL CONNECTION

The EB 311 riveting tool is powered by a rechargeable battery
included in the packaging.
Use only the battery charger supplied by FAR to recharge
this battery.
For information about the battery charger, see the instruction
booklet supplied with it.
Before plugging the battery charger into the power socket, make
sure that the line voltage corresponds to the value indicated on
the battery charger label.
Make sure the main electrical system is properly sized to support
the rated charge (see technical specifications).
Make sure the electrical system complies with current
regulations.
The power cord has a plug that must be inserted into a
matching socket.
Date 11-2016
Designation of
the tool
2
17