Main Components; Technical Data - FAR RAC 185 Instrucciones De Uso

MAIN COMPONENTS

A) ................................................................................. Nozzle
B) ............................................................Balancer connection
C) .................................................................... Nails container
D) .......................................................................Suction valve
E) .....................................Nail container adjustment coupling
F) ........................................................... O / I suction control
G) ....................................................... Tensile strenght button
H) ................................................................... Activation lever
I) ................................................. Compressed air connection
L) ............................................................... Protection bottom
57
B
A
Ø 22
G
H
285
I
L
Ø 130

TECHNICAL DATA

• Working pressure .................................................. 6,5 BAR
• Min. int. diam. of the compressed
air feeding hose ................................... min. diam = 6 mm
• Air consumption per cycle .........................................1,6 Nl
• .........................................6,5 BAR - 7500 N
Maximum force
• Weight .................................................................. 2,080 Kg
• Working temperature .............................................-5°/+50°
• Root mean square in total acceleration frequency (Ac)
to which the arms are subjected. .......................... 1,9 m/s2
• A-weighted emission sound pressure level
•
Peak C-weighted instantaneous sound pressure
•
A-weighted emission sound pressure
AIR FEED
The air feed must be free from foreign bodies and humidity
in order to protect the tool from premature wear and tear of
the components in movement, therefore we suggest to use a
lubrificator group for compressed air.
10
315
60
D
C
F E
..............68.6 dBA
...... <130 dBC
.......................89.4 dBA
GB
HOW TO USE YOUR RIVETING TOOL (fig. f1-f2)
The RAC185 riveting tool features a system that prevents it from
working when not correctly held by the operator.
To operate it, you must press the activation lever (H) with
your hand.
THIS SYSTEM ELIMINATES POINTLESS AIR CONSUMPTION.
Operation with suction of sheared nail (fig. f1)
make sure that the control (F) is in position I; this will enable
the system for holding the rivet in the tool and recovering the
sheared nail.
Operation without suction of sheared nail (fig. f2)
make sure that the control (F) is in position O; in this case the
sheared nail will fall out by gravity.
DO NOT PERFORM RIVETING OPERATIONS HOLDING THE
RIVET WITH YOUR FINGERS!
f1
f2
Date 11-2011
RAC 185 RAC 185
Revision - 00