Care & Cleaning - Breville the Smart Grinder Pro Manual De Instrucciones

Care & Cleaning
1. Empty beans from the hopper and grind out
any excess beans (see below).
2. Unplug power cord from power outlet
before cleaning.
3. Wash the grind container and lid, bean
hopper and lid in warm soapy water, rinse
and dry thoroughly.
4. Wipe and polish exterior of appliance with a
soft damp cloth.
CLEANING CONICAL BURRS
Regular cleaning helps the burrs achieve consistent grinding results which is especially important
when grinding for espresso coffee.
1 2
Unlock hopper Hold hopper over container & turn
dial to release beans into container
7 7 8 8
Clean upper Clean lower
burr with burr with
cleaning brush cleaning brush
3
AIR TIGHT
CONTAINER
Align hopper
into position
9 10
Clean grind Push upper
outlet with burr firmly into
brush position
NOTE
Do not use alkaline or abrasive cleaning
agents, steel wool or scouring pads, as these
can damage the surface.
NOTE
Please do not clean any grinder parts or
accessories in the dishwasher.
4 5
Run grinder Remove hopper
until empty
11 12
Lock upper burr Align hopper
into position
6
Remove upper
burr
13
Lock hopper
15