Care & Cleaning; Cleaning Agents - Breville The 3X Bluicer Pro Manual De Instrucciones

Ocultar thumbs Ver también para The 3X Bluicer Pro:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Care & Cleaning
Ensure the motor base is turned off by pressing
the ON | OFF button. Then unplug the power
cord.
PULP CONTAINER
To minimize cleaning, you can line the pulp
container with a biodegradable bag to collect
the pulp.
MOTOR BASE
Wipe down with a soft damp cloth. Do not
immerse the motor base in liquids.
CLEANING
1. Remove Blender Jug.
2. Disengage Locking Bar, pull up entire Juice
Collector Assembly and take to sink.
3. Remove Pulp Container.
Empty as much pulp as possible into bin/
compost. Rinse all parts after use (except the
motor base) under running water to clear away
the majority of juice and pulp. Wash in warm
soapy water with a soft cloth.
To avoid food drying on to the blades, mesh or
transparent parts, rinse and wash as soon as
possible after use.
JUG AND LID
In order to keep your jug clean and avoid food
drying on the blades and jug, follow the below
steps as soon as possible after use.
Rinse most of the ingredients off the jug and lid.
Fill the jug with 2 cups (16 ounces) of warm
water, fit the lid and press the AUTO CLEAN
button. If thick or sticky ingredients require
extra cleaning power add 1/2 teaspoon dishsoap
with 2 cups (16 ounces) of warm water.
Rinse the jug and lid again and/or wash
separately in warm soapy water with a soft cloth
or bottle brush.
It is most effective to clean the jug immediately
after use.
14
BJB815_USCM_IB_E20.indb 14
BJB815_USCM_IB_E20.indb 14
FILTER BASKET
To ensure consistent juicing results,
always clean the filter basket thoroughly
immediately after use, using the included
brush.
If pulp is left to dry, it may clog the fine
pores of the filter mesh, which can affect
juicing performance. The filter basket can be
soaked in hot soapy water for 10 minutes,
if necessary.
DISHWASHER
All parts except for the motor base and food
pusher are dishwasher safe. The blender
jug can be placed on the bottom shelf of
the dishwasher while the lid and inner
measuring cup should be washed on the
top shelf only. However, washing parts on a
regular basis in the dishwasher can shorten
the life of them due to prolonged exposure
to harsh detergents, hot water and pressure.
Cleaning the parts in the dishwasher also
may cause parts to deteriorate so inspect the
parts regularly and stop using the product if
any signs of damage is noticed.

CLEANING AGENTS

Do not use abrasive scouring pads or
cleaners on either the motor base or the jug,
as they may scratch the surface. Use only
warm soapy water with a soft cloth.
STUBBORN FOOD STAINS
Strong smelling foods such as garlic, fish
and some vegetables such as carrots may
leave an odor or stain on the blender jug and
lid. To remove, soak blender jug and lid for
5 minutes in warm soapy water. Then wash
with a mild detergent and warm water, rinse
well and dry thoroughly. Store jug with the
lid off.
25/9/20 2:28 pm
25/9/20 2:28 pm

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Bjb815

Tabla de contenido