Air Liquide Respireo Primo F Manual De Uso página 14

COMPONENT
Main body
Forehead support
Adjusting knob
Adjusting screw
Anti-suffocation fitting
Anti-suffocation valve
Swivel fitting
Forehead rest
Cushion
Cap
Headgear
Clip
13 - TECHNICAL DATA
MINIMUM CONTINUOUS FLOW
REMARK: Due to manufacturing differences, the exhalation flow
rate may differ from the values shown in the table (±10%).
ENGLISH
MATERIAL
Polycarbonate
Polycarbonate
Polypropylene
Polycarbonate
Polycarbonate
Silicone
Polycarbonate
Silicone
Silicone
Silicone
Nylon/polyurethane
Nylon
Normative references
Resistance
Operating pressure
Temperature range
Dead space volume inside
the mask
Inspiratory and expiratory
resistance during single
fault condition when the
anti-asphyxia valve is
activated
Anti-asphyxia valve opening
pressure
Anti-asphyxia valve closing
pressure
A-weighted sound pressure
level according to ISO 3744
A-weighted sound power
level according to ISO 3744
14 - LIMITED WARRANTY
This product by Air Liquide Medical Systems S.r.l. is guaranteed
against material and manufacturing defects for a period of 120 days
as from the date of purchase, provided it is used in accordance with
the operating instructions and for the intended purpose only.
If the product fails under conditions of normal use, Air Liquide
Medical Systems S.r.l. will repair or replace, at its option the
14
CE marking in accordance
with European Directive 93/42/
EEC, class IIa and subsequent
amendments
EN ISO 14971, ISO 5356-1, ISO
10993-1, EN ISO 17510-2
at 50 lpm: 0,3 cmH O - at 100 lpm:
2
0,6 cmH O
2
4-40 cmH O
2
5°C - 40°C
215 ml (Large)
0,6 cmH O
2
0,3 cmH O
2
0,1 cmH O
2
15,1 dB(A) ± 1,5 dB(A)
23,1 dB(A) ± 1,5 dB(A)