Cleaning The Inlet Filter - EAS ELECTRIC EMW1245GW Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

MAINTENANCES

Cleaning The Inlet Filter

Note!
• Inlet filter must be cleaned if there is less water.
Washing the filter in the tap
1.Close the tap.
2.Remove the water supply hose from the tap.
3.clean the filter.
4.Reconnect the water supply hose.
Washing the filter in washing machine
1. Screw off the inlet pipe from the backside of the
machine.
2. Pull out the filter with long nose pliers and
reinstall it back after being washed.
3. Use the brush to clean the filter
4. Reconnect the inlet pipe
5. Turn on the tap
Note!
If the brush is not clean, you can pull out the filter washed separately.
Clean The Detergent Dispenser
1.Press down the arrow location on softener cover inside the dispenser drawer.
2.Lift the clip up and take out softener cover and wash all grooves with water.
3.Restore the softener cover and push the drawer into position.
1
A
Pull out the dispenser
drawer with press the A
Note!
Do not use alcohol,solvents or chemical products to clean the machine.
V.2
2
Clean the dispenser
drawer under water
3
Clean inside the recess
with an old toothbrush
20
4
Insert the dispenser
drawer

Hide quick links:

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido