Cleaning And Maintenance; Technical Specifications - HQ-Power VDL500SMM Manual Del Usuario

6. Cleaning and Maintenance

1. All screws should be tightened and free of corrosion.
2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting
supports, do not change the location of the connections,
3. Moving mechanic parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician maintain the
device.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. There are no user-serviceable parts except for the fuse (see "Fuse").
8. Contact your dealer for spare parts if necessary.
9. Clean the heating element after every 30 hours of use with a special cleaning liquid available from
your dealer (order code VDLCL). Fill the tank with 1/3 of the bottle of cleaning liquid and let the
machine run for several short periods. Remove the remaining cleaning fluid from the tank and rinse
the tank thoroughly with distilled water.
Do NOT use regular water for cleaning or rinsing!

7. Technical Specifications

power supply
power consumption
fuse
smoke output
warm-up time
tank capacity
dimensions
weight
max. ambient temperature
max. housing temperature
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulted from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual, please visit our website
www.hqpower.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.
No part of this manual or may be copied, reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.
23.12.2010
VDL500SMM
max. 230VAC/50Hz
max. 500W
F 5A, 250VAC (5 x 20mm) (order code FF5N)
60m³/min
approx. 4 minutes
0.8 litres
280 x 190 x 160mm
3.1kg
45°C
130°C
5
Rev. 01
©Velleman nv