Angle Grinder; Machine Data - Dexter power AG230-4.1 Manual Del Usuario

ANGLE GRINDER

The numbers in the following text refer to the drawing on page 2-3.
WARNING -To reduce the risk of injury, user must read instruction manual.
Save all warnings and instructions for future reference.
Contents:

1 Machine data

2 Safety instructions
3 Assembly
4 Use
5 Service & Maintenance
Intended use
This machine is designed for grinding and cutting metals with the appropriate attachments. Use the machine and attachments
(note the manufacturer's specifications) only for the intended range of applications. Any other use is not permitted.
1. MACHINE DATA
Technical specification:
Type designation
Rated voltage
Rated power input
Speed, n
Spindle
Disc Diameter
Grinding disc Thickness
Level of acoustic pressure L
Level of acoustic power L
wA
Level of main handle vibration
Level of auxiliary handle vibration
Note:
- the declared vibration total value has been measured in accordance with a standard test method and may be used for
comparing one tool with another;
- the declared vibration total value may also be used in a preliminary assessment of exposure.
Warning:
- the vibration emission during actual use of the power tool can differ from the declared total value depending on the ways in
which the tool is used;
- avoid vibration risk
suggestion: 1) wear glove during operation
2) limit operating time and shorten trigger time.
Dexter Power
(K =3dB(A))
pA pA
(K =3dB(A))
wA
AG230-4.1 Angle Grinder
230V~ 50Hz
2100W
6500/min
M14
230mm
6mm
99.8 dB(A)
110.8 dB(A)
Vibration emission value a =11.026 m/s
h
Uncertain K=1.5m/s
2
Vibration emission value a =7.053 m/s
h
Uncertain K=1.5m/s
2
Original Instructions
2
2
EN
71