Safety Instructions - Dexter power AG230-4.1 Manual Del Usuario

Original Instructions
Contents of packing
1 Angle grinder
1 Auxiliary handle
1 wrench
1 Disc guard for grinding
1 Disc guard for cutting
1 Carbon brush
1 Instruction manual (with 1 safety instructions and 1 guarantee card)
After unpacking, check the tool and accessories for damages and do not use the tool in case something is defective.
Features
Fig. 1
1. Auxiliary handle
2. Spindle lock button
3. Guard locking lever
4. Disc guard for grinding
5. ON/OFF switch
6. Button to turn the main handle
7. Disc guard for cutting
8. inner flange
9. outer flange
2.

SAFETY INSTRUCTIONS

Explanation of symbols
In this manual and/or on the machine the following symbols are may used:
WARNING -To reduce the risk of injury, user must read instruction manual.
EN
In accordance with essential applicable safety standards of European directives
Class II machine – Double insulation – You don't need any earthed plug
Denotes risk of personal injury, loss of life or damage to the tool in case of non-observance of the instructions in
this manual
Indicates electrical shock hazard.
Faulty and/or discarded electrical or electronic apparatus have to be collected at the appropriate recycling loca-
tions
Immediately unplug the plug from the mains electricity in the case that the cord gets damaged and during
maintenance.
Wear eye protection
Wear dust mask
72
Dexter Power