General Information - Comet KM EXTRA Manual De Instrucciones

EN
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
English

GENERAL INFORMATION

Thank you for choosing our product; we wish to remind you that it has been designed and
produced paying the greatest attention to the safety of the operator, the efficiency of its work
and to the protection of the environment.
In order to keep these characteristics in time, please read the instructions manual carefully and
comply meticulously with its content.
The Manufacturer is not to be held responsible for damages caused by:
• the failure to comply with what is contained in the instruction manual;
• a use of the machine different from those indicated in the "INTENDED USE" paragraph;
• a use failing to comply with the current standards concerning safety and accident prevention
at work;
• incorrect installation;
• inadequate maintenance;
• modifications or operations that have not been previously authorised by the manufacturer;
• the use of non original spare parts or parts that are not suitable for the machine model;
• repairs that are not carried out by a QUALIFIED TECHNICIAN.
USE AND RETENTION OF THE INSTRUCTION MANUALS
The instruction manuals are an integral part of the machine and must be kept in a secure place,
that allows their prompt consultation when required. In the event of their deterioration or loss,
ask for copy from your retailer or from an authorised assistance centre. The instruction manuals
must accompany the machine in the event it changes owner.
DEFINITIONS
• QUALIFIED TECHNICIAN: a person, normally from the assistance centre, who is suitably
trained and authorised to carry out supplementary maintenance operations and repairs on
the machine. The operations on the electrical parts must be carried out by a SPECIALISED
TECHNICIAN who is also a QUALIFIED ELECTRICIAN, meaning a person who is professionally
certificated and trained to carry out the controls, installation and repair of electrical appliances,
in a workmanlike manner and in accordance with the current standards of the country where
the machine is installed.
EN
17