Comet KM EXTRA Manual De Instrucciones página 23

it previously checked by a QUALIFIED TECHNICIAN;
- Use suitable personal protection equipment against the noise emitted (e.g. protective ear
muffs).
• WARNING. Always turn off the cutoff switch from the power supply mains when the machine
is left unattended.
• WARNING. High pressure jets can be dangerous if subject to misuse. The jet must not be
directed at persons, live electrical equipment or the machine itself.
• If you use water jetters, insert hose to red mark before turning on the machine.
• WARNING. This machine has been designed for use with the cleaning agent supplied or
recommended by the manufacturer. The use of other cleaning agents or chemicals may
adversely affect the safety of the machine.
• WARNING. Risk of explosion - Do not spray flammable liquids.
• For environmental conservation, the cleaning of vehicle or machineries with hydraulic circuits
must only be carried out in areas equipped with suitable oil separator.
• The tyres of vehicles must be cleaned at a distance of no less than 50 cm/19 in, to avoid that
the water jet damages them. The first indication of damage to a tyre is its discoloration.
• Do not use the machine in the rain.
• Do not remove the plug from the power socket by pulling the power supply cable.
• Keep the power supply cable, possible extension leads, plugs and sockets dry. Never touch
them with wet hands.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
• Do not modify in any way the supplied condition of the machine, in particular, do not modify
the motor fixing structure, the pump, the guards and water connections; do not deactivate
or tamper with the controls and safety devices.
• Keep at a suitable distance from the machine's moving parts, even if suitably protected.
• Do not remove the guards from the moving parts.
• Do not work on pipes containing pressurised liquids.
• Unsuitable optional accessories impair the operation of the machine and could make it
dangerous. Use original optional accessories only, which have been recommended by the
manufacturer.
• Before handling or transporting the machine, carry out the operations indicated in
paragraph "STOP".
• The machine must be moved only using the points of grip offered by the handlebar or the
handle or, in case of lifting, those indicated by the specific symbol (see chart "MEANING OF
THE SYMBOLS USED").
• When transporting the machine, make sure it is well secured to the means of transport (with
ropes or other suitable systems). If present, activate the braking device.
EN
23