Comet KM EXTRA Manual De Instrucciones página 24

• If present, grip the handlebar tightly to avoid loosing ones grip due to bumps and jolts caused
by the unevenness of the ground. Consider this especially if the ground is damp.
• Do not move the wheeled machines with slopes over 2% or on very wet ground.
• After having moved the machine, always remember to activate the brake device if available.
• Read carefully the instructions and warnings on the labels of the detergents used and store
them in a safe place out of children's reach.
• In the event of contact with the eyes, wash immediately with water. If swallowed, do not
induce vomiting: consult a doctor immediately taking with you the packaging of the detergent.
• WARNING. Each operation of cleaning, maintenance, replacing parts and conversion of the
machine to another function must be carried out only after having performed the operations
described in paragraph "STOP", in a stable position (if present, activate the brake device)
and with the machine completely cooled.
In particular, always remember to remove the plug from the socket-outlet.
• When the machine is cooling, take care:
- not to leave it unattended if unguarded children, elderly or disabled people are present;
- to place it in a stable position without the danger of falling;
- to activate the brake device if available;
- not to put it in contact or close to inflammable materials.
• Do not use thinners or solvents to clean the machine.
• Waste oil must be suitably disposed of and not discarded into the environment.
• WARNING. To ensure machine safety, use only original spare parts from the manufacturer
or approved by the manufacturer.
• WARNING. High pressure hoses, fittings and couplings are important for the safety of the
machine. Use only hoses, fittings and couplings recommended by the manufacturer.
• The supplementary maintenance operations must only be carried out by a QUALIFIED
TECHNICIAN.
• For the replacement of wheels and tires only contact a QUALIFIED TECHNICIAN.
• In the event the correct function of the machine cannot be restored by means of the
information in the "TROUBLESHOOTING: PROBLEMS, CAUSES AND REMEDIES" table,
contact a QUALIFIED TECHNICIAN.
• Before scrapping the machine, ensure it cannot be used, for example by cutting the power
supply cable, and make parts safe that could be dangerous for children that may use the
machine to play with.
ADDITIONAL INSTRUCTIONS FOR MACHINES WITH COMBUSTION
ENGINE
• The instruction manuals should accompany that of the combustion engine supplied with the
machine.. The latter must accompany the machine at all times and read carefully, together
24
with the other manuals.