Function Selection - Mitsubishi Electric PLA-A12AA Manual De Instrucciones

8. Function Selection
[Function selection flowchart]
Setting language (English)
Change
Language
Function
selection
Mode
selection
Display
mode setting
Normal display |
(Display when the air condition is not running)
/
Hold down the (E} button and press the (_) button for 2 seconds. I
/
Remote controller function selection mode
F ...........
Item1
=
i i
®
®
®
Item2
English
Germany
Spanish
Russian
Italy
Chinese
French
Japanesel
I
=
@
i
Item3
@
@
,@
i l
i _ ii® °
@ @
Hold down the _E_button and press the (_) button for 2 seconds.
_E_Press the operation mode button.
L_ Press the TIMER MENU button.
Press the TIMER ON/OFF button.
Dot display
d%
@-
Xb
4£
4b
®
Operation lock setting is not used.
(Initial setting value)
Operation lock setting is except On/Off button.
Operation lock setting is All buttons.
The automatic mode is displayed when the operation mode is
selected. (Initial setting value)
The automatic mode is not displayed when the operation mode
is selected.
The temperature range limit is not active. (Initial setting value)
The temperature range can be changed on cooling/dry mode.
The temperature range can be changed on heating mode.
The temperature range can be changed on automatic mode.
The remote controller will be the main controller. (Initial setting value)
The remote controller will be the sub controller.
The clock function can be used. (Initial setting value)
The clock function can not be used.
Weekly timer can be used. (initial setting value)
Auto off timer can be used.
Simple timer can be used.
Timer mode can not be used.
The set contact numbers are not displayed in case of error.
(Initial setting value)
The set contact numbers are displayed in case of error.
The temperature unit °C is used. (Initial setting value)
The temperature unit °F is used.
Room air temperature is displayed. (initial setting value)
Room air temperature is not displayed.
One of "Automatic cooling" and "Automatic heating" is displayed
under the automatic mode is running. (Initial setting value)
Only "Automatic" is displayed under the automatic mode.
13