Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION
To protect yourself, think "Safety First":
• Comply with local and national safety codes.
• Use appropriate personal protective equipment such as face shields,
insulating gloves, insulating boots, and/or insulating mats.
• Before each use:
- Perform a continuity test by touching the test leads
to verify the
functionality of the battery and test leads.
- Use the 3 Point Safety Method. (1) Verify meter operation by
measuring a known
voltage. (2) Apply meter to circuit under test. (3) Return to the
known live voltage
again to ensure proper operation.
• Always work with a partner.
Instrument - Description
together
1. Display
2. Features
Pass indicator
High Voltage
indicator
3. Function Selector
& Power On/Off
4. Ω Input
5. V Insulation Input
6. Common Input
3
Feature Callouts
1. LCD Display - 4000 count
2. Push-Buttons for features
3. Function Selector to turn the Power On or Off and to select
a function.
4. Input Terminal for Ω function.
5. Input Terminal for V insulation functions.
6. Common (Ground reference) input Terminal for all
functions.
Symbols on the Unit
Risk of Danger. Important Information. See Manual.
Hazardous voltage.
~
Application around and removal from Hazardous Live conductors is permitted.
AC (Alternating Current)
DC (Direct Current)
Earth Ground
Measurement Category II applies to test and measuring circuits connected
CAT II
directly to utilization points (socket outlets and similar points) of the low-
voltage MAINS installation
Measurement Category III applies to measuring circuits connected to the
CAT III
distribution part of the building's low-voltage MAINS installation
Measurement Category IV applies to test and measuring circuits connected at
CAT IV
the source of the building's low-voltage MAINS installation
4
Publicidad
Tabla de contenido
