Tabla de contenido
Publicidad
GB
•
The appliance does not
•
work.
•
•
It is very difficult to
•
move the workpiece
along the saw blade in a
straight line and the saw
cut is uneven.
•
The workpiece is
•
starting to vibrate
violently during sawing.
•
The appliance runs
•
noisily and/or very
unevenly.
Cleaning
Regularly clean the machine housing with a soft cloth, preferably after each use. Keep the
ventilation slots free from dust and dirt. If the dirt does not come off use a soft cloth
moistened with soapy water. Never use solvents such as petrol, alcohol, ammonia water,
etc. These solvents may damage the plastic parts.
Faults
Should a fault occur, e.g. after wear of a part, please contact the service address on the
warranty card. In the back of this manual you find an exploded view showing the parts
that can be ordered.
Environment
To prevent damage during transport, the appliance is
delivered in a solid packaging which consists largely of reusable material. Therefore
please make use of options for recycling the packaging.
Faulty and/or discarded electrical or electronic apparatus have to be collected
at the appropriate recycling locations.
Warranty
The warranty conditions can be found on the separately enclosed warranty card.
12
The mains connection
•
Check the power cord
has been broken.
for damage.
The switch is damaged.
•
Contact the service
address on the warranty
card.
The saw blade is
•
Replace the saw blade.
warped or blunt.
The saw blade is
•
Replace the saw blade.
overheated or distorted.
The carbon brushes are
•
Contact the service
worn.
address on the warranty
card.
Kontroller maskinen, løsdele og tilbehør for transportskade.
Produktinformation
Fig. 1 +2b
1.
Hastighedskontrol
2.
Låseknap
3.
Afbryder
4.
Tilslutning til støvsuger
5.
Sekskantnøgle
6.
Bundplade
7.
Savsfæste
8.
Pendul
9.
Beskyttelsesstykke
10. Savklinger
2. SIKKERHEDSFORSKRIFTER
I denne brugsanvisning anvendes de følgende piktogrammer:
Denne maskine overholder alle relevante europæiske sikkerhedsforskrifter.
Det er en Klasse II maskine, hvilket vil sige, at den er dobbelt isoleret og derfor
ikke kræver et jordet stik.
N.B.: risiko for personskade, livsfare eller beskadigelse af maskinen, hvis
forskrifterne i brugsanvisningen ikke følges.
N.B.: elektrisk strøm! Kontroller altid, om motorens indgangsspænding
stemmer overens med netspændingen på mærkepladen.
Tag straks stikket ud af stikkontakten, hvis ledningen beskadiges og i
forbindelse med vedligeholdelse
Når maskinen bruges, skal man bære støvmaske. Når der saves træ, metal og
andre materialer kan der frigøres stoffer, som er sundhedsskadelige. Vær
opmærksom på, at der ikke må saves materialer, der indeholder asbest.
Læs instruktionerne omhyggeligt
Hårde materialer som stål, aluminium og plastic
Bløde materialer som træ
Ferm
Ferm
DK
97
Publicidad
Tabla de contenido
