Sony CFD-S20CP Manual De Instrucciones página 13

3
Tips
• Adjusting the volume or the
audio emphasis (see page
21) will not affect the
recording level.
• If the AM/MW/LW
programme makes a
whistling sound after
you've pressed z in step 3,
press MODE to select the
position of ISS
(Interference Suppress
Switch) that most decreases
the noise.
• For the best results, use the
mains as a power source.
• To erase a recording,
proceed as follows:
1 Insert the tape whose
recording you want to
erase.
2 Press TAPE.
3 Press z .
Press z to start recording
(n is depressed automatically).
Use these buttons for additional operations
To
stop recording
pause recording
turn on/off the player
OPERATE
(or POWER)
TAPE
xZ
X
Press
xZ
X
Press the button again to
resume recording.
OPERATE (or POWER, see
page 2)
GB
13