DSC WT4901 Instrucciones De Instalación página 3

Limited Warranty
Digital Security Controls warrants that for a period of 12 months
from the date of purchase, the product shall be free of defects in
materials and workmanship under normal use and that in fulfilment
of any breach of such warranty, Digital Security Controls shall, at its
option, repair or replace the defective equipment upon return of
the equipment to its repair depot. This warranty applies only to
defects in parts and workmanship and not to damage incurred in
shipping or handling, or damage due to causes beyond the con-
trol of Digital Security Controls such as lightning, excessive volt-
age, mechanical shock, water damage, or damage arising out of
abuse, alteration or improper application of the equipment. The
foregoing warranty shall apply only to the original buyer, and is and
shall be in lieu of any and all other warranties, whether expressed
or implied and of all other obligations or liabilities on the part of
Digital Security Controls. Digital Security Controls neither assumes
responsibility for, nor authorizes any other person purporting to act
on its behalf to modify or to change this warranty, nor to assume for
it any other warranty or liability concerning this product. In no event
shall Digital Security Controls be liable for any direct, indirect or
consequential damages, loss of anticipated profits, loss of time or
any other losses incurred by the buyer in connection with the pur-
chase, installation or operation or failure of this product.
Warning: Digital Security Controls recommends that the entire system
be completely tested on a regular basis. However, despite frequent test-
ing, and due to, but not limited to, criminal tampering or electrical dis-
ruption, it is possible for this product to fail to perform as expected.
Important: Changes or modifications not expressly approved by Digital
Security Controls could void the user's authority to operate this equip-
ment.
IMPORTANT - READ CAREFULLY: DSC Software purchased with or with-
out Products and Components is copyrighted and is purchased under the fol-
lowing license terms:
• This End-User License Agreement ("EULA") is a legal agreement
between You (the company, individual or entity who acquired the
Software and any related Hardware) and Digital Security Controls,
a division of Tyco Safety Products Canada Ltd. ("DSC"), the manu-
facturer of the integrated security systems and the developer of the
software and any related products or components ("HARDWARE")
which You acquired.
• If the DSC software product ("SOFTWARE PRODUCT" or
"SOFTWARE") is intended to be accompanied by HARDWARE,
and is NOT accompanied by new HARDWARE, You may not use,
copy or install the SOFTWARE PRODUCT. The SOFTWARE
PRODUCT includes computer software, and may include associ-
ated media, printed materials, and "online" or electronic documen-
tation.
• Any software provided along with the SOFTWARE PRODUCT
that is associated with a separate end-user license agreement is
licensed to You under the terms of that license agreement.
By installing, copying, downloading, storing, accessing or otherwise
using the SOFTWARE PRODUCT, You agree unconditionally to be
bound by the terms of this EULA, even if this EULA is deemed to be a
modification of any previous arrangement or contract. If You do not
agree to the terms of this EULA, DSC is unwilling to license the SOFT-
WARE PRODUCT to You, and You have no right to use it.
SOFTWARE PRODUCT LICENSE
The SOFTWARE PRODUCT is protected by copyright laws and international
copyright treaties, as well as other intellectual property laws and treaties. The
SOFTWARE PRODUCT is licensed, not sold.
1. GRANT OF LICENSE This EULA grants You the following rights:
(a) Software Installation and Use - For each license You acquire, You may
have only one copy of the SOFTWARE PRODUCT installed.
(b) Storage/Network Use - The SOFTWARE PRODUCT may not be
installed, accessed, displayed, run, shared or used concurrently on or from dif-
ferent computers, including a workstation, terminal or other digital electronic
device ("Device"). In other words, if You have several workstations, You will
have to acquire a license for each workstation where the SOFTWARE will be
used.
(c) Backup Copy - You may make back-up copies of the SOFTWARE
PRODUCT, but You may only have one copy per license installed at any given
time. You may use the back-up copy solely for archival purposes. Except as
expressly provided in this EULA, You may not otherwise make copies of the
SOFTWARE PRODUCT, including the printed materials accompanying the
SOFTWARE.
2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS
(a) Limitations on Reverse Engineering, Decompilation and Disassembly -
You may not reverse engineer, decompile, or disassemble the SOFTWARE
PRODUCT, except and only to the extent that such activity is expressly permit-
ted by applicable law notwithstanding this limitation. You may not make any
changes or modifications to the Software, without the written permission of an
officer of DSC. You may not remove any proprietary notices, marks or labels
from the Software Product. You shall institute reasonable measures to ensure
compliance with the terms and conditions of this EULA.
(b) Separation of Components - The SOFTWARE PRODUCT is licensed as
a single product. Its component parts may not be separated for use on more
than one HARDWARE unit. (c)Single INTEGRATED PRODUCT - If You
acquired this SOFTWARE with HARDWARE, then the SOFTWARE PROD-
UCT is licensed with the HARDWARE as a single integrated product. In this
case, the SOFTWARE PRODUCT may only be used with the HARDWARE
as set forth in this EULA. (d)Rental - You may not rent, lease or lend the
SOFTWARE PRODUCT. You may not make it available to others or post it on
a server or web site. (e)Software Product Transfer - You may transfer all of
Your rights under this EULA only as part of a permanent sale or transfer of the
HARDWARE, provided You retain no copies, You transfer all of the SOFT-
WARE PRODUCT (including all component parts, the media and printed
materials, any upgrades and this EULA), and provided the recipient agrees to
the terms of this EULA. If the SOFTWARE PRODUCT is an upgrade, any
transfer must also include all prior versions of the SOFTWARE PRODUCT. (f)
Termination - Without prejudice to any other rights, DSC may terminate this
EULA if You fail to comply with the terms and conditions of this EULA. In
such event, You must destroy all copies of the SOFTWARE PRODUCT and all
of its component parts. (g)Trademarks - This EULA does not grant You any
rights in connection with any trademarks or service marks of DSC or its suppli-
ers.
3. COPYRIGHT - All title and intellectual property rights in and to the
SOFTWARE PRODUCT (including but not limited to any images, photo-
graphs, and text incorporated into the SOFTWARE PRODUCT), the accom-
panying printed materials, and any copies of the SOFTWARE PRODUCT, are
owned by DSC or its suppliers. You may not copy the printed materials
accompanying the SOFTWARE PRODUCT. All title and intellectual property
rights in and to the content which may be accessed through use of the SOFT-
WARE PRODUCT are the property of the respective content owner and may
be protected by applicable copyright or other intellectual property laws and
treaties. This EULA grants You no rights to use such content. All rights not
expressly granted under this EULA are reserved by DSC and its suppliers.
4. EXPORT RESTRICTIONS - You agree that You will not export or
re-export the SOFTWARE PRODUCT to any country, person, or entity subject
to Canadian export restrictions.
5. CHOICE OF LAW - This Software License Agreement is governed by
the laws of the Province of Ontario, Canada.
6. ARBITRATION - All disputes arising in connection with this Agreement
shall be determined by final and binding arbitration in accordance with the
Arbitration Act, and the parties agree to be bound by the arbitrator's decision.
The place of arbitration shall be Toronto, Canada, and the language of the arbi-
tration shall be English.
7. LIMITED WARRANTY
(a) NO WARRANTY - DSC PROVIDES THE SOFTWARE "AS IS"
WITHOUT WARRANTY. DSC DOES NOT WARRANT THAT
THE SOFTWARE WILL MEET YOUR REQUIREMENTS OR
THAT OPERATION OF THE SOFTWARE WILL BE UNINTER-
RUPTED OR ERROR-FREE. (b) CHANGES IN OPERATING
ENVIRONMENT - DSC shall not be responsible for problems
caused by changes in the operating characteristics of the HARD-
WARE, or for problems in the interaction of the SOFTWARE PROD-
UCT with non-DSC-SOFTWARE or HARDWARE PRODUCTS.
(c) LIMITATION OF LIABILITY; WARRANTY REFLECTS
ALLOCATION OF RISK - IN ANY EVENT, IF ANY STATUTE
IMPLIES WARRANTIES OR CONDITIONS NOT STATED IN
THIS LICENSE AGREEMENT, DSC'S ENTIRE LIABILITY
UNDER ANY PROVISION OF THIS LICENSE AGREEMENT
SHALL BE LIMITED TO THE GREATER OF THE AMOUNT
ACTUALLY PAID BY YOU TO LICENSE THE SOFTWARE
PRODUCT AND FIVE CANADIAN DOLLARS (CAD$5.00).
BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF LIABILITY FOR CONSE-
QUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMI-
TATION MAY NOT APPLY TO YOU. (d) DISCLAIMER OF
WARRANTIES - THIS WARRANTY CONTAINS THE ENTIRE
WARRANTY AND SHALL BE IN LIEU OF ANY AND ALL
OTHER WARRANTIES, WHETHER EXPRESSED OR IMPLIED
(INCLUDING ALL IMPLIED WARRANTIES OF MERCHANT-
ABILITY OR FITNESS FOR A PARTICULAR PURPOSE) AND
OF ALL OTHER OBLIGATIONS OR LIABILITIES ON THE PART
OF DSC. DSC MAKES NO OTHER WARRANTIES. DSC NEI-
THER ASSUMES NOR AUTHORIZES ANY OTHER PERSON
PURPORTING TO ACT ON ITS BEHALF TO MODIFY OR TO
CHANGE THIS WARRANTY, NOR TO ASSUME FOR IT ANY
OTHER WARRANTY OR LIABILITY CONCERNING THIS
SOFTWARE PRODUCT. (e) EXCLUSIVE REMEDY AND LIMI-
TATION OF WARRANTY - UNDER NO CIRCUMSTANCES
SHALL DSC BE LIABLE FOR ANY SPECIAL, INCIDENTAL,
CONSEQUENTIAL OR INDIRECT DAMAGES BASED UPON
BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLI-
GENCE, STRICT LIABILITY, OR ANY OTHER LEGAL THEORY.
SUCH DAMAGES INCLUDE, BUT ARE NOT LIMITED TO,
LOSS OF PROFITS, LOSS OF THE SOFTWARE PRODUCT OR
ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF
SUBSTITUTE OR REPLACEMENT EQUIPMENT, FACILITIES
OR SERVICES, DOWN TIME, PURCHASERS TIME, THE
CLAIMS OF THIRD PARTIES, INCLUDING CUSTOMERS, AND
INJURY TO PROPERTY. WARNING:
DSC recommends that the entire system be completely tested on a regular
basis. However, despite frequent testing, and due to, but not limited to,
criminal tampering or electrical disruption, it is possible for this SOFT-
WARE PRODUCT to fail to perform as expected.
NFPA72 Mounting Requirements (USA)
If ceiling heights allow, wall-mounted appliances shall have their tops above
the finished floors at heights of not less than 2.30 m (90 in.) and below the fin-
ished ceilings at distances of not less than 150 mm (6 in.). Mounting heights
other than those shall be permitted by the authority having jurisdiction pro-
vided the sound pressure level requirements are met.