Redmond RMC-M4502A Manual De Usuario página 17

VII. BEFORE CONTACTING A SERVICE CENTER
Error code Error description
System error; system board or heating element
Е1- Е3
malfunction.
Problem
The unit does not switch on.
The meal is taking too long to cook.
The packaging, user manual and the device itself may not be treated as household waste. Instead, it shall be taken to the applicable collection
point for the recycling of electrical and electronic equipment.
© REDMOND. All rights reserved. 2014
Reproduction, transfer, distribution, translation or other reworking of this document or any part thereof without prior written permission of the legal
owner is prohibited.
Error handling
Unplug the device and let it cool down. Close the lid tightly. Switch the appliance back
on. If this does not eliminate the error, address an authorized service center.
Possible Cause
Voltage supply failure.
Voltage supply interruption.
The bowl is installed with a distortion.
There is a foreign object between the bowl and the heating
element.
The heating element is dirty.
Solving the problem
Check the voltage supply.
Check the voltage supply.
Install the bowl properly.
Remove the foreign object.
Unplug the device and let it cool down. Clean the heating
element.
RMC-M4502A
ENG
17