Bench Mounting - Makita DLS714 Manual De Instrucciones

22 Slide pole (upper)
26 Lever (for bevel angle
adjustment)
INSTALLATION

Bench mounting

WARNING:
Ensure that the tool does not
move on the supporting surface. Movement of the
miter saw on the supporting surface while cutting may
result in loss of control and serious personal injury.
1.
Fix the base to a level and stable surface, screw-
ing with two bolts. This helps to prevent from tipping and
possible injury.
181 mm
► 1. Bolt
25
28
23 Thumb screw (for lock-
ing upper slide pole)
27 Slide pole (lower)
1
8.5 x 2
181 mm
22
27
24 Hex wrench
28 Thumb screw (for lock-
ing lower slide pole)
2. Turn the adjusting bolt clockwise or counterclock-
wise so that it comes into a contact with the floor sur-
face to keep the tool stable.
1
► 1. Adjusting bolt
8 ENGLISH
23
24
25
26
25 Clamp screw (for locking
holder)
- -