Zeiss Primo Star Instrucciones De Manejo página 29

Primo Star / Primo Star iLED
The camera has a number of ports:
SD / SDHC card port (Fig. 17/4) for storing
−
image data, see section 3.5.3.1
USB 2.0 port (Fig. 18/2) for communication and
−
image data transfer, as well as power supply,
see section 3.5.3.2
HDMI port (Fig. 18/3) for image data transfer to
−
a monitor, TV or projector, see section 3.5.3.3
Fast Ethernet port (Fig. 18/1) for communication
−
and image data transfer, see section 3.5.3.4
The following connecting cables are required for voltage supply and use of the ports:
Item Name
1a USB 2.0 Y cable
1b USB 2.0 cable
(not supplied)
2 Plug-in power supply
Output 5 V DC, 1.0 A
3a HDMI cable
(not supplied)
11/2013
Start-Up and Operation
Figure
415500-7344-008
1 Ethernet port
2 USB 2.0 port or power supply in operation without
PC
3 HDMI output
Fig. 18 Interfaces on reverse side of the
binocular tube 30°/20
Remarks
Connection between
binocular tube 30°/20 with
integrated camera and PC /
plug-in power supply
Connection between
binocular tube 30°/20 with
integrated camera and plug-
in power supply
Power cord
100-240 V
50 / 60 Hz
Connection between
binocular tube 30°/20 with
integrated camera and
monitor, TV or projector
Carl Zeiss
29