Changing The Distance Display Unit (F3) - Nikon COOLSHOT PRO STABILIZED Manual De Instrucciones

„ Changing the distance display unit (F3)
„
For the display unit of the measurement results, select YD (yards) or m (meters). Factory default setting is
En
YD (yard).
Es
1. Press the PWR button to turn on the Laser Rangefinder.
2. Press and hold the MODE button.
Fr
3. Press the MODE button twice.
De
• You can now change the distance display unit.
It
4. The setting switches every time you press the PWR button.
Sv
(yard)
Nl
Ru
• If you press and hold the MODE button or do not operate the buttons for
Pb
about 8 seconds, the displayed setting is saved and the Laser Rangefinder
returns to standby.
Pl
• The setting is saved even when the Laser Rangefinder is turned OFF.
Fi
No
Dk
Cz
Ro
Hu
16
(meter)