Load Favorites; Maintenance And Troubleshooting; User Maintenance; Cleaning Of Apparatus - Enraf Nonius Sonopuls 190 Instrucciones De Manejo

8.6.1

Load Favorites

•
Push the icon Favorites

9 Maintenance and Troubleshooting

9.1 User Maintenance

9.1.1

Cleaning of apparatus

To clean the unit, turn it off and unplug the power supply. Clean the unit with a damp cloth. Do not use
abrasive cleaners. A small amount of mild household detergent may be used, if needed.
To disinfect the unit we advise to use Dismozon® pur. in a solution between 0,25 and 1,5%
9.1.2

Cleaning display panel

The display panel contains an anti-reflective coating, which needs special care when cleaned. Use a soft
and dry cotton cloth or micro fibre tissue to clean the panel. To remove fingerprints or grease, use a non-
abrasive glass cleaning agent. Apply a small amount of the cleaning agent to a soft cotton cloth and then
carefully clean the panel.
CAUTION:
•
Do not spray the cleaning agent directly on the glass panel.
•
Do not use cleaning agents that contain strong alkalis, lye, acid, detergents with fluoride or
detergents with ammonia.
•
Use no liquid detergents, these can damage the apparatus.
9.1.3

Ultrasound applicator

To prevent corrosion, clean and dry the contact surface immediately after use. Make sure that no
ultrasound gel remains on the applicator.
To disinfect the treatment applicator we advice to use Dismozon® pur. in a solution between 0,25 and
1,5%. This product can be ordered at Enraf-Nonius under the number 3442438.
Select a program via the
icon.
•
Place the applicator on the
treatment area (with gel).
•
Contact control indicator
turns off and the treatment
time will start (countdown
starts)
If there is insufficient contact, the
indicator will light up and
treatment time will interrupt.
47