Provider's Notes; Specifications - DeVilbiss Healthcare iGo 306DS Manual Del Usuario

Sistema de oxígeno portátil
Ocultar thumbs Ver también para iGo 306DS:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 13
cannula/Mask, tubing, and humidifier bottle
Clean and replace the cannula/mask, tubing, and humidifier bottle according to the manufacturer's instructions.
exterior covers and deVilbiss rechargeable battery
WArnInG
To avoid electric shock, do not remove the iGo covers. The covers should only be removed by a qualified DeVilbiss provider. Do not apply liquid directly to the
covers or utilize any petroleum-based solvents or cleaning agents.
Use of harsh chemicals (including alcohol) is not recommended. If bactericidal cleaning is required, a non-alcohol based product should be used to avoid
inadvertent damage.
The exterior covers and rechargeable battery should be cleaned as needed. To clean, follow these steps:
1.
The battery should remain installed and be wiped clean with the covers. If battery is removed, wipe the battery bay and battery with a Dry Cloth only.
2.
Clean the iGo exterior covers by using a damp cloth with a mild household cleaner and wipe it dry.
If device has been exposed to contagious pathogens, contact your provider for instructions.
rolling carry case and detachable Wheeled cart
The carry case and/or cart should be cleaned as needed. To clean, follow these steps:
1.
Remove the iGo from the carry case or cart before cleaning.
2.
Clean the case or cart by using a damp cloth with a mild household cleaner and wipe dry.
battery Storage
Your Battery should be stored in a cool, dry location when not in use.
battery disposal / disposal of equipment and Accessories
Your Battery is rechargeable and can be recycled. Follow local governing ordinances and recycling plans regarding disposal of device components. Do not dispose of the
rechargeable Battery. Contact your DeVilbiss provider before disposal of battery or any iGo components.
ProVIder'S noteS - cleaning and disinfection When there is a Patient change
When medical devices have already been used with a patient, contamination with human pathogenic germs should be assumed (unless there is evidence to the contrary), and
the next patient, user or third party should be protected by appropriate handling and preparation. Therefore, when there is a patient change, people must be protected during
the transport and handling of the device, and the device must be fully processed, i.e., cleaned and disinfected, by suitably trained personnel before reuse to protect the next
patient. The complete processing may only be done by the manufacturer or by a qualified DeVilbiss provider/service technician.
NOTe–IfthefollowingdescribedcompleteprocessingoftheconcentratorbyaqualifiedDeVilbissprovider/technicianisnotpossible,thedevicemustnotbeusedbyanother
patient!
DeVilbiss Healthcare recommends that at least the following procedures be carried out by the manufacturer or a qualified third party between uses by different patients.
NOTe–If preventive maintenance is due at this time, these procedures should be carried out in addition to the servicing procedures.
1. D ispose of all accessory components that are not suitable for reuse, i.e., particularly the oxygen tubing, the nasal cannula/mask, oxygen outlet connector and humidifier
bottle.
CAUTION–the concentrator must be disconnected from the power supply for this step: Open the concentrator and remove all dust deposits inside the cabinet with
2.
an appropriate vacuum cleaner.
3.
Clean and disinfect all parts of the cabinet inside and outside and the power cord with a suitable disinfecting agent, e.g., Microbac Forte, Terralin
Peract.
4.
Check the cord, the plug on the back of the device, the power switch, the fuse holder and the indicator light for possible damage.
5.
Replace all damaged or worn components.
6. Replace the cabinet air filter on the back of the device.
7. Check the oxygen concentration. If the device is within specifications, the extended life intake bacteria filter does not need to be replaced between patients. If the
concentration is not within specifications, the provider should refer to the service manual section on Troubleshooting.

SPecIFIcAtIonS

Dimensions (H x W x D) ...........................................................................................................................................15 inches x 11 inches x 8 inches (38.0 cm x 28.0 cm x 20.0 cm)
Weight ..............................................................................................................................................................19 pounds (8.6 kg) with Battery; 15.5 pounds (7.0 kg) without Battery
Flow Rate Settings ................................................................................................................................................................................................................1 to 6 in PulseDose Mode
Maximum Recommended Continuous Flow (@ nominal outlet pressures of 0 and 7 kPa) ................................................................................................................................3 LPM
Maximum Breathing Rate (PulseDose mode only) ...................................................................................................................................................................40 BPM @ settings 1-4
Oxygen Concentration ................................................................................................................................................................................................... 91% ± 3% for all flow settings
Maximum System Pressure ............................................................................................................................................................................................................15 psig (103.5 kPa)
Oxygen Outlet Pressure ...................................................................................................................................................................................................5.0 ± 1.0 psig (34.5 ± 7 kPa)
Operating Temperature.....................................................................................................................................................................................................41°F to 104°F (5°C to 40°C)
Operating Humidity ...........................................................................................................................................................................................10% - 95% at 82.4°F (28°C) dew point
Transportation and Storage Temperature ................................................................................................................................................................ -4°F to +140°F (-20°C to +60°C)
Transportation and Storage Humidity .............................................................................................................................................................................. 10% to 95% non-condensing
Transportation and Storage Atmospheric Pressure (at nominal temperature and humidity) (Tested at ~933 hPa) ......................................................................640 hPA - 1010 hPA
Altitude (Tested at ~933 hPa) ................................................................................................................................................................................... 0 –13,123 feet (0 – 4,000 meters)
Nominal Sound Level ....................................................................................................................................................................................40 dBA at 3 in PulseDose Delivery Mode
Maximum Sound Level in Battery Mode (from front) @ 3 LPM continuous flow ................................................................................................................................................48 dBA
Maximum Sound Level as test per ISO 8359 .....................................................................................................................................................................................................55 dBA
A-306-1
, Aldahol, Cidex OPA or
®
1 to 3 LPM in Continuous Flow Mode
37 BPM @ setting 5
31 BPM @ setting 6
en - 11

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido