Provider Checklist - DeVilbiss Healthcare iGo 306DS Manual Del Usuario

Sistema de oxígeno portátil
Ocultar thumbs Ver también para iGo 306DS:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 13
The iGo is equipped with a High Pressure Relief Valve to ensure the user's safety.
C hanging the L/min. setting will affect the dose of oxygen delivered, DO NOT readjust the L/min. setting unless directed by your physician.
DO NOT ignore alerts. The iGo is not intended for life supporting or life sustaining applications, nor does it provide any patient monitoring capabilities. Consult your
physician for the type of back-up system required.
DO NOT leave the iGo or DC Adapter plugged into the vehicle without the engine running or attempt to start the vehicle while the DC Adapter is connected to the vehicle.
This may drain the vehicle's battery.
DO NOT operate device or accessories in standing water and DO NOT submerse or expose to water. Electric shock or damage to the unit may result.
P rotect the Battery and AC/DC Adapters from fluid spills or drips to avoid possible shock hazards.
T he Rechargeable Battery may explode and cause potential injury if exposed to or disposed of in a fire.
D O NOT short circuit the battery's metal contacts with metallic objects such as keys or coins. It may cause sparks or excessive heat.
DO NOT disassemble, puncture, or crush the Battery. Rechargeable Battery electrolytes may be toxic if swallowed and can be harmful to skin and eyes. Use of a
damaged Battery may cause personal injury. Keep the Battery away from children.
This device contains electrical and/or electronic equipment. Follow local governing ordinances and recycling plans regarding disposal of device components.
Equipment not suitable for use in the presence of a flammable anesthetic mixture with air or with oxygen or nitrous oxide.
cAutIonS
Federal (U.S.A.) law restricts this device to sale by or on the order of a physician.
Do not use in an area where the air may be contaminated with carbon monoxide or hydrocarbons as this may shorten the life of the unit (i.e. near running gasoline
engines, furnace, or heater).
Use only the iGo AC Adapter and DC Adapter supplied with your iGo. Use of another power supply will void the warranty. Do not use parts, accessories, or adapters
other than those authorized by DeVilbiss.
Locate oxygen tubing and power supply cords to prevent tripping hazards.
D o not use with other equipment (i.e. humidifier, nebulizer, etc.) when in PulseDose
D O NOT expose unit to temperature outside of specified operating or storage temperatures as this may damage the unit. DO NOT expose the Rechargeable Battery to
temperatures above 140°F (60°C) such as in a vehicle parked in the sun or on a hot day.
I f the External Power light flashes and the audible alert sounds but the unit is not operating, there is no power to the unit. Refer to Troubleshooting and contact your
DeVilbiss provider if necessary.
Do not place this device near other equipment or devices that create or attract electromagnetic fields. Placing the unit in electromagnetic fields greater than 10 V/m can
affect its operation. Examples of such equipment are defibrillators, diathermy equipment, cellular telephones, CB radios, radio-controlled toys, microwave ovens, etc.
PhYSIcIAn'S/reSPIrAtorY therAPISt'S noteS
1. U se only continuous flow mode of operation with patients who breathe below 6 Breaths Per Minute (BPM); refer to specifications for maximum breath rate.
2. U se only continuous flow mode of operation with patients who consistently fail to trigger equipment (i.e. mouth breathing with closed soft palates).
3. P ulseDose settings should be determined for each patient individually. Settings from continuous flow applications may not be applicable to PulseDose mode.
4.
Verify patient is getting adequate Pa02 or Sa02 levels in PulseDose delivery mode.
5. U se only standard nasal cannula with PulseDose delivery. Do not use pediatric (low-flow) nasal cannula with PulseDose delivery. Any nasal cannula can be used with
continuous flow delivery.
6.
PulseDose settings should be determined for each patient individually. Settings from Continuous Flow applications may not be applicable to PulseDose Mode.
7. D o not use with other equipment (i.e. humidifier, nebulizer, etc.) when in PulseDose delivery mode.
ProVIder'S checKlISt
1.
Upon arrival, check the iGo for damage that may have occurred during shipping and notify DeVilbiss of any damage. (Obvious shipping damage should be reported
within 10 calendar days after arrival.) Do not use damaged equipment. Save the carton, noting the position of the unit and placement of the packing material for possible
future return.
2.
Record the number of hours on the hour meter underneath the unit.
3. Verify that the air filter is in place in the handle cavity.
4.
Plug the unit into an electrical outlet, turn the unit ON, and check the audible and visible alerts.
5. S et the flow to 3 LPM in continuous flow mode and let the unit run for at least 20 minutes.
6.
Use an oxygen analyzer to check the concentration.
NOTe– I ftheunitfailstooperateproperly,oxygenconcentrationisnotwithinspecification,orexternal/internaldamageisfound,contactDeVilbissforinstructions.
7.
Instruct the user on the safe operation of the portable oxygen system; review the Important Safeguards and observe all Warnings and Cautions on the product and in the
instruction guide.
8.
Leave a copy of this instruction guide with the user.
NOTe--DeVilbiss recommends leaving a reserve oxygen supply with the patient when setting up the iGo, and instructing the patient to always keep reserve oxygen on hand.
en - 4
delivery mode.
®
A-306-1

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido