Skoda EEA 400 001A Instrucciones De Montaje página 30

8353_TAZNE_ZAR_FABIA/MN/.fm Page 29 Wednesday, September 8, 2004 9:17 AM
- 16 -
- For a try, insert the trailing arm (P) into the clamping bush in the trailer coupling.
After pulling the control lever (R) of the trailing arm upwards, there must be a clea-
rance of 3 mm at least (see the dimension) between the lever and the upper rim of
the orifice in the bumper.
- Take out the trailing arm and deposit it into the tub of the spare wheel in the luggage
compartment.
- Glue the self-adhesive label "50 kg" above the orifice cut out in the rear bumper
(before gluing it, clean and degrease the place with a suitable cleaner).
- Mount back the inserts of the rear mud guards.
- Mount back the rear bumper and the rear mud traps.
- 17a, 17b -
- Fit the protection plug (S) into the clamping bush of the trailer coupling, and cover the
orifice in the rear bumper with the cover (T , T ) of the same colour shade as the
1 2
bumper.
- Mount back the rear combined light.
- Mount back the rear wheels of the car and tighten the screws of the wheels to
the prescribed tightening moment (see Service inspections and maintenance).
- 18 -
- In the luggage compartment, lead the cables of the electric installation of the trailer
coupling to the rear combined lights in compliance with the existing electric installation
of the car.
- Lead the bunch of cables with the black-white, brown and grey-black colours on the
left (in the riding direction) and fasten it with cable clamps (U) to the existing electric
installation.
- Lead the bunch of cables with the black-green and grey-red colours on the right (in
the riding direction) and fasten it with cable clamps (U) to the existing electric installa-
tion -detail-.
- Fasten the white terminal board (preparation of power supply (12 V) for the other
appliances in the camping trailer) to the harness of the electric installation with a fas-
tening tape.
- Connect the brown conductor with tag (connection to earth) under the closest earth-
connecting screw at the L.H. group of lights.
- 19 -
- Take the six-pole terminal board out of the combined light and connect it with the ter-
minal board (V) on the bunch of cables of the trailer coupling - both the sides of the car.
Black process 45.0° 141.0 LPI