Description And Use - Vortice Nordik Eco Series Manual De Instrucciones

ENGLISH

Description and use

NOTE
The product you have purchased is a Wi-Fi card that connects Nordik Eco series ceiling fans to the Vort Delta
T WIFI control unit.
Installation with rods 290÷915
Fig. 1 - 9
Installation with rod 160
Fig. 10 - 29
Operation
Note
Switch off the potentiometer if present to use the fan connected to the Vort Delta T WIFI via Wi-Fi.
The only user function on the card is reset in the event of problems during network configuration.
To do so, press and hold the RESET button (fig.31) for about 10 seconds until the LED begins flashing. After it
has flashed a few times, the LED will remain steady on for a few seconds and then switch off. The factory default
values for the SSID and password have now been reset.
5