Troubleshooting - Auriol AHFL 433 A1 Instrucciones De Uso

Changing the radio channel display on the weather
station
If the weather station is receiving the outdoor sensor radio
signal, it will automatically display the appropriate channel.
However, you can also manually set the display of the various
radio channels.
♦ Press
button
plays
(show only channel 3) and
nels in a loop).
NOTE
► Only the values from outdoor sensors which are connected
to the weather station will be displayed.
► If you are using several outdoor sensors you should select
a different radio channel for each outdoor sensor.

Troubleshooting

Connection cannot be made to the outdoor sensor.
■ Disruptive obstacles or other interference sources such as
concrete walls or other radio transmission appliances are
located between the weather station and the outdoor sensor.
Change the installation location and try again.
■ Distance between weather station and outdoor sensor is too
great.
Decrease the distance. "Visual contact" between the
outdoor sensor and the weather station often improves
the transmission.
■ The batteries in the weather station or the outdoor sensor are
dead.
Replace the batteries.
AHFL 433 A1
repeatedly to toggle between the dis-
(show only channel 1), (show only channel 2),
(scroll through all chan-
GB │ IE │
47 ■