Care And Maintenance; General Notes; Panels; Remove/Attach Engine Panels - Kärcher MIC 26C Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 184
10

Care and maintenance

10.1 General notes

 First switch off the appliance and remove the ignition
key before performing any cleaning or maintenance
tasks on the appliance, replacing parts or switching
over to another function.
 The battery must be disconnected prior to working on
the electrical system.
 Lock parking brake.
 Maintenance work may only be carried out by approved
customer service outlets or experts in this field who are
familiar with the respective safety regulations.

10.2 Panels

10.2.1 Remove/attach engine panels

WARNING
Risk of burns Let the appliance cool off before removing
the covers.
1 Side engine panel
2 Radiator grid
The completion of the difference maintenance tasks, the
engine panels must be removed.
10.2.2 Remove the engine's side panels
1 Cover lock
 Open both hood latches.
 Raise the panels and swivel them to the top and out.
 Remove panels.
62
10.2.3 Install the engine's side panels
1 Fastening bushing
2 Centering cone
 Thread the bottom end of the panel behind the wheel.
 Swivel the panel up to the appliance and hook the top
edge of the panel into the fastening bushing.
 Close the hood latches.

10.2.4 Remove the radiator grill

1 Lock
 Open both latches (pull the latch out, rotate about 90°
and release).
 Swivel the radiator grill toward the top, pull up and re-
move.
25
-
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido