Safari Browser Of The Ipad - Selection Of Wlan Mode - Zeiss Stemi 305 cam Instrucciones De Manejo

ZEISS
The Safari browser of the iPad opens (see Fig. 9).
Fig. 9 Safari browser of the iPad – selection of WLAN mode
•
Select the required mode As an access point (Mode "WLAN Access Point") or Connect to existing
WLAN (Mode "Connection to existing WLAN") and acknowledge by pressing Next.
•
Close Safari Browser and configuration page.
If there is no iPad, and provided the Stemi 305 cam is in mode "WLAN Access Point", the following
approach is possible as an alternative:
•
Connect PC to the WLAN of the Stemi 305 cam and open an available browser on the PC.
•
Enter http://192.168.1.26 into the address line.
•
Enter user name admin and password ZEISS1864.
The configuration page Configure Microscope in the browser opens.
•
Change over the WLAN setting as described above to the mode "Connection to existing WLAN".
If the Stemi 305 cam is in mode "Connection to existing WLAN", the mode cannot be changed
directly. To this effect, the Stemi 305 cam must be reset to the factory settings via the Reset
feature.
20
OPERATION OF THE INTEGRATED CAMERA WITH WI-FI
Setting the WLAN mode (Wi-Fi) of the integrated camera
435063-9044-008
Stereo microscope
Stemi 305 cam
03/2015