Error Codes - GYS GYSDUCTION AUTO Manual Del Usuario

ERROR CODES

CODE MEANING
E - 1 Pneumatic foot-pedal activated when the device is switched ON.
E - 2 Glass inductor button switch activated when the device is switched ON.
E - 3 One key is activated on the front panel when the device is switched ON.
E - 4 Over-intensity in the inductor (either because it is too hot, or because there is a short circuit).
E - 5 Defective inductor (cut wire or disconnected wire).
NO– ACC Accessory not connected.
AC - Accessory not recognized.
16
GYSDUCTION AUTO EN