caprari MEC-A Serie Instrucciones De Servicio página 21

6.4 Spare parts:
Only ever use genuine Caprari spare parts. Failure to do so could void the guarantee and would relieve the manufacturer of all responsibility in
merit.
Specify the following information when ordering spare parts from Caprari S.p.A. or from one of their Authorized After-Sales Centers:
3 - the denomination and reference number of the part as indicated in the spares catalogue (available from authorized after-sales centers), in the
4 - the required number of parts.
:
If the pump remains inactive for 20÷30 days, make sure that the rotor is free to turn and that the hydraulic part is primed before starting.
If the pump and pipes cannot be protected against freezing, they must be completely emptied.
Consult chapter 4 "Handling and storage" for other instructions.
7 DISMANTLING AND DISPOSAL:
When dismantling the product, the technician must proceed with the relative phases in strict compliance with the local rules and regulations
governing such activity and with all the instructions in this manual.
:
The general conditions of sale governing all products manufactured by CAPRARI S.p,A, are also valid for the product in question.
In particular, remember that one of the essential conditions for recognition of the warranty is compliance with all the individual instructions given
in the enclosed documentation and the best hydraulic and electrotechnical provisions, fundamental condition to ensure regular operation of the
product.
Malfunction caused by wear and/or corrosion is not covered by the warranty.
Sales Centers.
Failure to comply with the instructions in the documentation supplied with the product shall void all form of guarantee and responsibility.
Caprari S.p.A.
MEC-A / MEC-MR / MEC-AG / MEC-MG / HM / HMU / BHR
GB
21