Device Structure - Starmix Airstar T-C1 Instrucciones Para El Manejo

en
Do not pull the mains connection cable over sharp edges, do not bend it or clamp it. Only replace a damaged
mains connection cable with one meeting the specifications in the Technical Data chapter.
Do not operate the device including the accessories in the following cases:
– Power cord is defective or has cracks
– Device is noticeably damaged, e.g. by cracks in the housing
– If an invisible defect is suspected, e.g. after a fall or impact
In the following cases, unplug the power cord, switch off the circuit breaker or unscrew the fuse:
– When the device makes unusual noises
– Before any maintenance or cleaning
When unplugging, only pull on the mains plug and not on the mains connection cable. Never touch the mains
plug with wet hands.
Avoiding risks during installation
For the installation and operation of the device, please observe:
– The national and regional regulations
– The technical regulations and guidelines
– The provisions of the local authorities
Avoiding risks during operation
Do not use the device in rooms with toxic, explosive or flammable fumes and gases, or with microbiologically
contaminated air. Do not insert any objects into the opening of the device. Do not cover the device or deposit
objects on it.
Avoid any danger during maintenance and repair
Only have repairs carried out by experts. Only use original accessories and spare parts.

2 Device structure

See Fig. A, B.
1 Device
2 Mounting plate
3 Sensor
4 Outlet opening
5 Air intake grille
3 Installation
Unpacking
1. Take all of the parts out of the packaging.
Scope of delivery:
– 1 device
– 1 mounting plate
– 4 screws
– 4 dowels
– 1 screw for the electric terminal cover
18
6 Locking screw
7 Nozzle
8 Magnet in handle
9 Hose