AEG PNEUMATIC 6000 S Instrucciones De Uso página 3

Brief description
Fully insulated metal gear box for long durability
and protection from electric shock.
Hammer drilling chuck for bits and
accessories with SDS-max reception –
tools are locked automatically after
insertion.
Attachable depth gauge.
Adjustable auxiliary
handle with vibration
absorption.
Built-in safety clutch helps prevent the machine
from rotating if the drill bit jams.
Function of
rotary pneumatic
hammer
ENGLISH
The impact needed for hammer drilling in stone is created by a pneumatic hammer
striking mechanism. Similar to hitting a common chisel with a hammer, a plunger hits
the axially moving chisel. The electric motor moves the plunger back and forth crank
drive –> piston –> freely moving piston. There is a pneumatic cushion between
piston and freely moving piston (pneumatic hammer mechanism). This results in a
highly effective hammering action.
Exerting greater power does not increase the machine's effectiveness.
2
Ergonomically designed
housing with soft grip.
Anti–Vibration–System AVS. The drive
motor is suspended independently of the
switch handle, insulating elements absorb up
to 50 % of the vibration when hammer
drilling.
Switch trigger for switching the
machine on and off, and for
smooth starting and varying
speed.
Selector lever for switching between
hammer drilling and chiselling.
Modifications: Text, diagrams and data are correct at the
time of printing. In the interest of continuous improvement
of our products, technical specifications are subject to
alteration without prior notice.
PNEUMATIC 6000 S