Safety Instructions; General Safety Instructions; Machine-Related Safety Instructions; Emission Levels - Festool CARVEX PS 400 EBQ Manual De Instrucciones Original/Lista De Piezas De Repuesto

CARVEX
GB
Jigsaws
Weight
Safety class
5

Safety instructions

5.1

General safety instructions

WARNING! Read all safety warn-
ings and all instructions. Failure to
follow the warnings and instructions may re-
sult in electric shock, fire and/or serious in-
jury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
5.2 Machine-related safety instruc-
tions
– Hold power tool by insulated gripping
surfaces, when performing an opera-
tion where the cutting accessory may
contact hidden wiring or its own cord.
Cutting accessory contacting a "live" wire
may make exposed metal parts of the pow-
er tool "live" and could give the operator an
electric shock.
– Festool electric power tools must only
be installed on work tables provided
by Festool for this purpose. If the tool is
installed in another, or self-made, work ta-
ble, it can become unstable and result in
serious accidents.
– Wait until the power tool stops com-
pletely until placing it down. The tool
can become entangled and lead to a loss of
control of the power tool.
– Deformed or cracked saw blades and saw
blades with blunt or broken cutting edges
must not be used.
– Always place the pendulum jigsaw on the
workpiece with the saw blade running.
– Wear suitable protection such as ear pro-
tection, safety goggles, a dust mask for
work which generates dust, and protective
gloves when working with raw materials
and when changing tools.
– Always secure the workpiece in such a
manner that it cannot move while being
sawed.
14
PS 400 EBQ
1,9 kg
– Always connect the machine to a dust ex-
tractor when work involves dust genera-
tion.
– Check the plug and the cable regularly and
should either become damaged, have
them replaced by an authorised after-sales
service workshop.
– Stroboscopic light can cause epileptic
seizures. Do not use this machine if you
are susceptible to epileptic seizures.
– Do not look into the stroboscope light.
Looking into the light source can damage
your vision.
5.3 Metalworking
The following precautions are to be
taken when processing metals for
safety reasons:
– Pre-connect a residual current circuit-
breaker (FI, PRCD).
– Connect the machine to a suitable dust ex-
tractor.
– Clean tool regularly of dust accumulations
in the motor housing.
Wear protective goggles.
5.4

Emission levels

Levels determined in accordance with EN
60745 are typically:
Sound pressure level
Noise level
Uncertainty
CAUTION
Operating noise
Damage to hearing
X Use ear protection!
Vibration emission value a
three directions) and uncertainty K mea-
sured in accordance with EN 60745:
PSB 400 EBQ
/II
L = 88 dB(A)
PA
L = 99 dB(A)
WA
K = 3 dB
(vector sum for
h