INITIAL SETUP
VIDEO SETUP
COMPONENT
There can be great differences in the picture quality
between different portions of a movie. It can be changes
by selecting one of the following options.
S-VIDEO:
Separate video, abbreviated S-Video and
also known as Y/C (or
erroneously
video") is an analog video signal that carries the video
data as two separate signals (brightness and color).
YUV:
YPbPr is the analog video signal carried by
component video cable in consumer electronics. Note
that the green cable carries Y, the blue cable carries
Pb and the red cable carries Pr.
RGB:
A representation of additive color mixing
based (analog electronics) television three color
electron guns are used to stimulate such an
arrangement of phosphorescent coatings of the
glass, the resultant remission of photons providing the
image seen by the eye.
QUALITY
The video signal quality can be adjusted by following
the steps listed blow.
!
Sharpness: High / Medium / Low levels.
!
Brightness: Adjusts the Brightness level from -20 to
+20.
!
Contrast: Adjusts the Contrast level from -16 to +16.
, S-VHS and "super
—In CRT
E17