General Safety Instructions - Bostitch GF9033-E Instrucciones De Seguridad

GAS POWERED FRAMING NAILER - GF9033
SAFETY AND OPERATION MANUAL
THIS POWER TOOL IS POWERED BY AN
GB
INTERNAL COMBUSTION DEVICE AND
SHOULD ONLY BE USED WITH THE
DISPENSERS OF COMBUSTIBLE GAS
WHICH ARE LISTED IN THESE HANDLING
INSTRUCTIONS.
BEFORE OPERATING THIS TOOL, ALL OPERATORS
SHOULD STUDY THIS MANUAL AND THE TOOL
TECHNICAL DATA TO UNDERSTAND AND FOLLOW
THE SAFETY WARNINGS AND INSTRUCTIONS. KEEP
THESE INSTRUCTIONS WITH THE TOOL FOR FUTURE
REFERENCE.
IF YOU HAVE ANY QUESTIONS, CONTACT YOUR
BOSTITCH REPRESENTATIVE OR DISTRIBUTOR.
Bostitch tools have been designed to provide excellent
customer satisfaction and are designed to achieve
maximum performance when used with precision
Bostitch fasteners, engineered to the same exacting
standards. They will deliver efficient, dependable
service when used correctly and with care. As with any
fine power tool, the manufacturer's instructions must be
followed for best results.
Note: Additional safety measures may be required
because of your particular application of the tool.
Contact your Bostitch representative or distributor with
any questions concerning the tool and its use.
Note: Bostitch cannot assume responsibility for
product performance if any of our tools are used with
fasteners or accessories not meeting the specific
requirements established for genuine Bostitch nails,
staples, batteries, fuel cells, chargers and accessories.
LIMITED WARRANTY
BOSTITCH is confident of the quality of its products
and offers a guarantee for professional users of the
product. This guarantee statement is in addition to
and in no way prejudices your contractual rights as a
professional user or your statutory rights as a private
non-professional user. The guarantee is valid within
the territories of the Member States of the European
Union and the European Free Trade Area.
4
HEARING AND EYE PROTECTION
MUST BE WORN
If your BOSTITCH product becomes defective due to
faulty materials or workmanship within 12 months from
the date of purchase, BOSTITCH guarantees to replace
all defective parts free of charge or – at our discretion
– replace the unit free of charge provided that:
• The product has not been misused • The product
has been subject to fair wear and tear; Driver blades,
bumpers, and O rings are considered normally
wearing parts and are excluded • Repairs have not
been attempted by unauthorised persons • Proof
of purchase is produced • The product is returned
complete with all original components • The product
is returned at your expense together with proof
of purchase to our regional repair centre, or an
authorised warranty centre.
If you wish to make a claim, contact your seller or check
the location of your nearest authorised BOSTITCH
repair agent in the BOSTITCH catalogue or contact your
BOSTITCH office at the address indicated in this manual.
ACCESSORIES
These tools are supplied with the following accessories:
1) Battery charger
2) Case
3) Hexagonal bar wrench for M5 screws
4) Battery
Optional accessories are also available and sold
seperately:
1) Fuel cells

GENERAL SAFETY INSTRUCTIONS

Only those fasteners, batteries, fuel cells and chargers
that are specified in these operating instructions
should be used with the tool. The tool and the specified
fasteners are to be considered as one single system for
safety purposes.
Repairs shall only be carried out by the authorised
agents of Bostitch or by other experts, giving due regard
to the safety, operating and maintenance instructions in
this manual and tool technical data.
Note: Experts are those who, as a result of professional
training or experience, have acquired sufficient
expertise in the field of fastener driving tools as to be
able to assess the safe condition of fastener driving
tools.
x 1
x 1
x 1
x 2
Code ref: FC80MLHP(B)