Meet The Docucolor 5252; Installation And Setup - Xerox DocuColor 5252 Manual De Instrucciones

Meet the DocuColor 5252!

Upper Duplex Document Feeder
Transport and Scanner
Door
Tray 1
Tray 2
Tray 3
Transport Module
The cut-away view above identifies modules of the basic configuration of the digital press and
shows the paper path from the trays through the printing area to the Offset Catch Tray. Notice
that paper feeds from the right side of Tray 3, and from the left side of Trays 1 and 2. Optional
equipment that you may have includes High Capacity Stacker, Enhanced High Capacity
Stacker, and a High Capacity Stacker/Stapler.
We recommend you read the Overview chapter of the Operator Manual to become better
acquainted with using the Control Panel and Touch Screen.

Installation and Setup

Your Xerox representative installed all the digital press modules and the color server
ordered with your press and, along with your System Administrator, installed print
drivers on at least one workstation connected to the network. A test job was sent to
the press to ensure all connections were working correctly.
Touch Screen
Dry Ink/Toner
Control Panel
cartridges
4
Offset Catch
Tray
Exit Module with
paper decurlers