S e t u p y o u r p h o n e
Replace the back cover
1. Set the back cover on the
phone with the cover tabs
aligned with the slots in
the phone.
2. Slide the back cover
toward the top of the
phone until the back
cover is securely in place.
Charge the battery
Note: Before you use a charger with this device, check its model number.
This device is intended for use when supplied with power from the AC-3
or AC-4 charger.
1. Plug the charger transformer into a standard wall outlet.
2. Insert the charger output
plug into the round jack
at the bottom end of
the phone.
After a few seconds, the
battery indicator on the
display starts to scroll from
bottom to top. If the
battery is completely
discharged, it may take a few minutes before the charging indicator appears
on the display or before any calls can be made.
The ACP-12, ACP-9, ACP-8, ACP-7, and the LCH-12 can also be used to charge
the phone, but it must be used with the CA-44 adapter included in the box:
1. Plug the charger transformer into a standard wall outlet.
16