Max / Min Altitude; Total Accumulated Max / Min Altitude; Vertical Speed; Max Ascending / Descending Speed - Oregon Scientific Outbreaker Mountain-Ski Manual De Uso

Weather Icon
Setting
For further information on these features see the relevant
section heading below.

MAX / MIN ALTITUDE

This screen shows the highest or lowest point you have
reached so far in relation to your watch's permanent
altitude setting.
1. Press + to toggle between max and min altitude.
2. Press and hold SET to make the max or min altitude
your current height reading.

TOTAL ACCUMULATED MAX / MIN ALTITUDE

This screen shows the total distance you have ascended
or descended; that is, every incline is added together or
'accumulated', and likewise every decline is added and
'accumulated', to give a total.
1. Press + to toggle between total max and min altitude.
2. Press and hold SET to clear the reading.

VERTICAL SPEED

This screen shows how fast you are currently climbing.

MAX ASCENDING / DESCENDING SPEED

This screen shows the fastest speed you have ascended
or descended.
1. Press + to toggle between the max up or down speed.
2. Press and hold SET to clear the reading.

ALTITUDE ALARM

The ascending or descending altitude alarm will be turned
on when the set altitude is reached during an ascent or
descent respectively.
1. Press + to activate (or deactivate) the altitude alarm.
2. Press and hold SET to enter setting mode.
3. Press + or - to change the setting.
4. Press SET to confirm.
Press any key to stop the alarm sound. If the set value is
reached again, the alarm will be re-activated.
NOTE Setting the altitude affects the sea level pressure.
12