Thermador SEM272 Manual De Cuidado Y Uso página 22

Oven Operations
Convection Roast Mode and Probe Operation
6 . To change the Probe temperature:
To change the Probe temperature from
160ºF (71ºC), select another temperature
immediately before starting. The Probe
temperature continues to be displayed in-
stead of the oven temperature.
Message scrolls in display.
7 . Select START.
The temperature display alternates be-
tween the set Probe temperature and
the actual meat/poultry temperature, in-
creasing in 5ºF increments starting with
100ºF.
Touch CONVECTION ROAST once to set
oven temperature. The oven temp is dis-
played for 5 seconds before the probe
display continues.
8 . To Change Oven Temperature
Touch CONVECTION ROAST twice, en-
ter new temperature and press start.
9. The oven beeps 3 times when the meat/
poultry item Probe temperature is
End
reached. is displayed as the heat
turns off.
• When roasting whole chickens or turkey, tuck
wings behind back and loosely tie legs with
kitchen string.
• The broil pan with the grid can be used in this
mode.
• Double-check the internal temperature of meat
or poultry by inserting probe into another position.
Touch
1 4 5
Touch
START
Convection Roast Tips
• After removing the meat item from the oven,
cover loosely with foil for 10 to 15 minutes before
carving.
• While covered, small roast temperatures may
increase 5ºF and large roast temperatures
increase 10ºF.
• Roasting large cuts of meat and poultry generally
takes 10 to 20 percent less cooking time than
roast or bake mode. Check doneness early.
20
SEM/SEMW Oven Care and Use Manual
You Will See
o
145
UPPER
Select PROBE temperature
then touch START
o o
100 /145
UPPER
Convect Roast
Cooking Complete -- remove food
3: 29
3: 29