Care And Cleaning; Control Panel; Packaging Tape; Painted Surfaces - GE JKS10-27 Manual Del Usuario

Care and cleaning of the oven.
Be sure electrical power is off and all surfaces are cool before cleaning any part of the oven.
How to Remove Protective Shipping Film and Packaging Tape
Careflllly grasp a corner of file protective
shipping film wifll your fingeIs and slowly
peel it flom the appliance surfime. Do
not use ally shalp imms m remove the
film. Remove aU of the film before using
the appliance for the first time.
To assure no damage is done m the
finish of the product, the safest way to
remove die adhesive flom packaging
tape on new appliances is all application
of a household liquid dishw_tshing
deteigent. Apply with a soft cloth and
aUow m soak.
NOTE:Theadhesive mustbe removed fromall
parts.It cannot b e removed if it is bakedon.
Oven Racks
Clean the oven racks with an abrasive
cleanser or smel wool.
Alker cleaning, rinse the racks wifll clean
water and dIT wifll a clean cloth.
Donotallow foodspillswith a
highsugaror acidcontent ( such as
tomatoes, sauerkraut, fruitjuices
or pie filling)toremabon the
surface. T hey maycause a duff
spotevenaftercleaning.
Porcelain Oven Interior
Wifll proper care, file porcelain enamel
finish on file inside of file oven--top,
bottom, sides, back and inside of file
door--will stay new-looking for yeais.
Let file oven cool before cleaning. We
recommend fllat you wear robber gloves
when cleaning the oven.
Soap and wamr Mll nomlally do the
.job. Hea_ 3'spattering or spilloveis may
require cleaning with a mild abrasNe
cleaneL Soap-filled smel wool pads
may also be used.
Household ammonia may make the
cleaningjob easieL Place 1/2 cup in a
shaUow glass or potm U container in a
cold oven overnight. The ammonia
flmles will help loosen the burne&on
grease and food.
If necessaD_ you may use all oven cleaneL
Follow file package directions.
Donotsprayovencleaneron theelectrical
controls andswitchesbecause it couldcause a
shortcircuitandresultin sparking or fire.
, Donotallowa film fromthecleanertobuildup
on thetemperature s ensor--it couldcause the
oventoheatimproperly. (Thesensor islocated
at the topof theoven.) C arefully wipethe
sensor cleanafter eachovencleaning, b eing
carefulnotto movethesensor asa change b
its positioncouldaffecthow theovenbakes.
Do not sprayany ovencleaner on the oven
door,handles or any exterior surface of the
oven,cabinets or painted suffaces. Thecleaner
can damage these surfaces.
Painted Surfaces
Clean with soap and water ore vinegar and
water sohlfion.
Donotusecommercial ovencleaners, cleansbg
powders,steelwoolor harshabrasives onany
pabted surface.
Control Panel
It's a good idea m Mpe die conuol panel
after each use. Clean widl mild soap and
wamr or vinegar and wami; rinse with
clean wamr and polish dIT with a soft
cloth. When cleaning, the conuol panel
should be at room temperature and not
ill direct sunlight.
Do not use M)rasNe cleansers, suong
liquid cleansers, plastic scouring pads or
oven cleanei_ on the conuol panel--they
will damage the finish. A 50/50 solution
of vinegar and hot wamr works well.
74