Troubleshooting Tips - GE JKS10-27 Manual Del Usuario

Before you call for service...
Troubleshooting -tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
GEAppliances.com
Possible Causes What To Do
Control signals after
You forgot to enter a bake
* Press the BAKE pad and desired
temperature.
entering cooking time temperature.
or delay start
Food does not bake Oven controls improperly set. * See the Using the oven section.
or
roastproperly
Rack position is incorrect • See the Using the oven section.
or the rack is not level.
Oven thermostat needs • See the Adjust the oven thermostat--Do it yourself!
adjustment, section.
Food does not Oven door is open. • Close file dooL This model is designed for closed door
broilproperly
broiling only. Always broil with the door closed.
Oven controls improperly set. • Make sure you press the BROIL HI/LO pad.
Improper rack position • See the Broiling Guide.
being used.
Food being cooked • For best results, use a pan desigmed for broiling.
in a hot pan. Make sure it is cool.
Cookware not suited • For best results, use a pan desigmed for broiling.
for broiling.
In some areas the power • Preheat the broil element for 10 minutes.
(voltage) may be low.
• Broil for the longest period of time recommended in
the Broiling Guide.
Clock and timer
A fuse in your home may be
• Replace
file fuse or reset file circuit breakeL
do not work blown or the circuit breaker
tripped.
Oven controls improperly set.
• See the Using the clock and timer section.
Oven light does Light bulb is loose or defective. • Tighten or replace the bulb.
not work
Pad operating light is broken. • Call for service.
77