Faber STILO ANGOLO/SP Manual De Instrucciones página 9

INSTALLATION
12r
11
12a
Mark the following on the Wall:
• Rest the Bracket 7.2.1 as indicated 1-2 mm from the ceiling or top limit.
• Mark the centres of the Bores in the Bracket.
• Rest the Bracket 7.2.1 as indicated X mm under the first bracket (X = height of the Top
Chimney provided).
• Mark the centres of the Bores in the Bracket.
• Rest the Hood Coupling Support 7.1 as indicated 1004 mm above the Cooker Top, checking
that the fixing bores are equidistant from the corner of the wall.
• Mark the centres of the Bores in the Support.
• Drill the points marked with a ø 8 mm drill bit.
• Insert the plugs 11 into the holes.
• Draw a Horizontal line on the Wall 668 mm above the Cooker Top.
• Rest the Safety Brackets 7.5 as indicated on the reference Horizontal line, at a distance of
908 mm from the corner of the wall, checking that they are level.
• Mark the centres of the Bores in the Safety Brackets.
• Drill the points marked with a ø 8 mm drill bit.
• Insert the plugs 11 into the holes.
• Fix the Brackets and the Support, using the Screws 12a (4.2 x 44.4) provided.
• Fasten 2 Screws 12r (4.2 x 12.7) provided into the Hood Canopy fixing holes, positioned on
the front plate of the Hood Coupling Support, leaving a space of 5-6 mm between the sup-
port and the head of the screw.
EN
Drilling the Wall and Fixing the Brackets
11
12a
12a
11
7.5
7.2.1
908
908
7.1
1÷2
9
9