Cleaning And Ordering Of Spare Parts; Ordering Replacement Parts; Disposal And Recycling - EINHELL DMH 250/2 Manual De Instrucciones

Anleitung_DMH_250_2_SPK 7:_
GB
8. Excluded from the guarantee are:
Wear parts
Damage caused by too much operating pressure.
Damage caused by non-conditioned compressed
air.
Damage caused by improper use or unauthorized
intervention.

9. Cleaning and ordering of spare parts

9.1 Cleaning
Keep all safety devices, air vents and the motor
housing free of dirt and dust as far as possible.
Wipe the equipment with a clean cloth or blow it
down with compressed air at low pressure.
We recommend that you clean the equipment
immediately after you use it.
Clean the equipment regularly with a damp cloth
and some soft soap. Do not use cleaning agents
or solvents; these may be aggressive to the
plastic parts in the equipment. Ensure that no
water can get into the interior of the equipment.

9.2 Ordering replacement parts:

Please provide the following information on all orders
for spare parts:
Model/type of the equipment
Article number of the equipment
ID number of the equipment
For our latest prices and information please go to
www.isc-gmbh.info
10. Storage
Store the equipment and accessories out of children's
reach in a dark and dry place at above freezing
temperature. The ideal storage temperature is
between 5 and 30 °C. Store the equipment in its
original packaging.

11. Disposal and recycling

The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. The
equipment and its accessories are made of various
types of material, such as metal and plastic. Defective
components must be disposed of as special waste.
Ask your dealer or your local council.
16
22.03.2012 9:03 Uhr Seite 16