Product Description; Appropriate Use; Installation Procedure; Technical Data And Dimensions - Vega VEGAPULS WL S 61 Manual De Instrucciones

2 Mounting
1

Product description

1.1

Appropriate use

The suspension cable screw connection is used
for installation and height adjustment of level
probe type VEGAWELL 52
2 Mounting
2.1

Installation procedure

Abb. 6: Configuration, screw connection of suspension
cable
1 Suspension cable
2 Sealing screw
3 Cone bushing
4 Cone seal
5 Base element
6 Flat seal
Mount VEGAWELL 52 with screw connection
for suspension cable as follows:
1. Lower VEGAWELL 52 to the requested
height through the welded socket on the
vessel
2. Open the screw connection with a suitable
wrench (wrench size see chapter "Dimen-
sions") and push the suspension cable from
below into the base element
3. Slide the sealing cone and the cone sleeve
over the suspension cable, fasten manually
with the seal screw
4. First tighten the base element in the welded
socket with a suitable wrench, then tighten
the sealing screw
How to correct the height:
1. Loosen sealing screw
2. Slide cone seal and cone sleeve to the
requested position on the cable
3. Tighten the sealing screw
6
1
2
3
4
5
6
Disassembly is carried out in reverse order.
Warning:
Before dismounting, make sure that the-
re are no dangerous process conditions
such as e.g. pressure in the vessel or
high temperatures.
3 Technical data and
dimensions
3.1 Technical data
Materials, wetted parts:
•
Screw connection for suspension cable:
316L, PVDF
•
Flat seal: NBR with Aramide fibres
Weight:
•
Basic weight approx. : 0.35 kg (0.772 lbs)
Process conditions:
•
Pressure rating: PN 3
•
Process temperature: -20 ... +80 °C
(-4 ... +176 °F)
Mechanical data:
•
Cable diameter: 8 mm (0.315 in)
•
Retention force max.: 150 N (corresponding
to 150 m suspension cable)
3.2 Dimensions
SW 22 mm
(0.87")
SW 27 mm
(1.06")
Abb. 7: Screw connection for suspension cable G¾
(DIN 3852-A)
Screw connection for suspension cable •
ø 32 mm
(1.26")
ø 8 mm
(0.32")
G3/4