Fitting The Wall Spacer; Aligning The Scale; Weighing - Seca 761 Manual De Instrucciones Y Garantía

4.3 Fitting the wall spacer

4.4 Aligning the scale

5. WEIGHING

32 •
If you wish to position the scale close to a wall, we
recommend using the transport lock (see section
"Removing the transport lock") as a wall spacer. This
stops the weighing platform from touching the wall and
the measured result from being incorrect.
1. Position the transport lock as shown in the adjacent
drawing.
2. Attach the transport lock to the lower section of the
housing.
ATTENTION!
Incorrect measurement due to force shunts
Soft floor coverings such as carpets may cause
weights to be measured incorrectly.
►
Set the scale up so that only its feet are in
contact with the floor.
►
Place the scale on a firm, flat surface.
CAUTION!
Bodily injury
Perform a function check before every use as
described in the section "Function check" on
page 36.