Installation; Electrical Connection - THOMSON KGT330NWI Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
SAFETY:
µ This model refrigerator is commercialised with R600a coolant. Points
to note:
This coolant does not affect the environment.
It is inflammable, so the cooling circuit must be in perfect condition.
If damaged in any way, consult your distributor before switching on.
µ This refrigerator must be repaired only by the technical assistance
service, using original spares.
µ In case of damage to the power cable, to avoid hazards it should also be replaced by
the technical assistance service.
µ Do not use flame-producing equipment or electrical apparatus inside the refrigerator.
µ This appliance is not designed for use by physically, sensorially or mentally
handicapped people (including children), or people with no experience or
knowledge of this type of appliance, unless they have been instructed in its use by a
responsible person.
Children must be supervised to ensure they do not play with the appliance.
µ Do not introduce volatile liquids or inflammable products.

3. INSTALLATION

LOCATION:
µ Ensure that the refrigerator is located away from heat sources
(stoves, radiators, etc.) and protected from direct sunlight, which
increases consumption.
µ Allow air flow around the rear of the refrigerator. Do not cover the
space between the refrigerator and the floor or the top of the
refrigerator with any object.
µ The refrigerator must not be installed outdoors, or exposed to rain.
µ To ensure better energy efficiency, a 20 mm space is recommended between the
back of the refrigerator and the wall.
µ On certain occasions, relative humidity and room temperature may generate
condensation on the inside and outside of the refrigerator.
To avoid vibrations and noise, ensure that the refrigerator is stable and level.

ELECTRICAL CONNECTION:

µ Plug specifications: 220-240V with earth.
µ Do not use adaptors or extension cables.
µ Ensure that the cable is not in contact with the motor.
µ Ensure that the cable is not caught under the refrigerator.
4

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido